Answer to Question #10458 Submitted to "Ask the Experts"
Category: Medical and Dental Equipment and Shielding — Equipment
The following question was answered by an expert in the appropriate field:
What would be a good detector to buy for measuring x-ray machine radiation around a cabinet x-ray system used for checking food products?
For cabinet x-ray systems, typically used for checking items for hidden foreign objects, a standard Geiger counter with a thin-end window would be used to detect if any radiation leaks were present. The Food and Drug Administration (FDA) regulates cabinet x-ray systems and their emission limit is less than 5 microsieverts (uSv) in one hour at any point 5 centimeters outside the external surface. Geiger counters are great for detection of leaks; however, to measure any exposures accurately, I would recommend an ion chamber survey meter. Geiger counters typically will overrespond to the low-energy x rays used in these devices and give an erroneous measurement, so to measure the exposure levels accurately, an ion chamber would be used. Unfortunately, ion chambers are terrible detection devices, so both devices would be necessary to document compliance with the FDA regulations.
You should also be aware that cabinet x rays are equipped with safety interlocks to prevent them from being operated with the shielding open. A comprehensive safety inspection would also include interlock checks to confirm that they are operating properly.
You might want to take a look at the FDA website and regulations that cover these types of systems. Additionally, your state regulations may require periodic safety inspections of cabinet x-ray systems by a radiation safety professional.
Mike Bohan
Radiation Safety Officer